GARAGE DOORS

While decorative garage doors protect from all kinds of natural conditions, they also provide security against thieves. Sectional garage doors are one of the most preferred systems in closed garages of buildings and sites as well as in detached buildings. The panels of decorative garage doors consist of decorative cassette panels with finger-squeeze protection and can be lined and / or double-walled decorative windows can be applied on the panels optionally.

In decorative garage doors, the windows provide light entry to the garage and give the door a stylish appearance. By using the distance between the ceiling height and the door transition height in the most appropriate way, the rollers connected to the panels slide in the rail.Decorative garage door works with 22 cm turning distances according to the height measurement detail.

Decorative garage doors are manufactured in accordance with the dimensions with sandwich panels and accessories with European quality certificates, produced by us. Decorative garage door consists of steel sandwich panels. Sandwich panels are obtained by injecting high pressure polyurethane between galvanized steel sheets. Excellent sound and heat insulation is provided by high pressure polyurethane. The wind resistance of the panels is Class 5 test degree.

The plates on the front and back surfaces of the decorative garage door panels are interlocked with each other in 4 layers, so there are no problems such as material separation between the interior and exterior surfaces. Decorative panels have a special finger compression protection system, this feature prevents any fingers from getting caught between the panels.

Decorative garage door is embedded in the distance between the transition height and the ceiling height. (Lifting is about a quarter circle used for turning while opening the door and pulling it parallel to the ceiling.) Decorative garage doors can be easily opened manually with a 24 V-DC / 50 Hz electric motor and a double torsion spring (wind-up) system that balances the door weight. Door weight does not force the user and automation because of the springs.

EPDM gaskets between the decorative garage door panels, on the door, on the sides and bottom rows prevent dust, air and rainwater from entering. Hollow EPDM gasket located under the garage door ensures that the door fits smoothly on the ground.

To increase the wind resistance of the sectional decorative garage door, the panels are reinforced with steel plates from the inside. In addition, it is reinforced with a 4-layer sheet metal structure to prevent deformation in the places where the hinges and door handles are located. The wheel sets that provide the movement of the door on the rails are made of noise-canceling polyamide to ensure quiet operation. 

Traction motor systems with domestic brand, Italian and German technology CE and ISO 9001 standards are used in decorative garage doors. It works very quietly. Any number of remote controls can be coded. An additional button can be connected, a bulb is connected to the output on the engine for lighting. Motor limit settings can be made easily with electronic switches.

In case of power outages, the door can be opened easily by taking the motor to the manual. If there is no other entrance to the garage, the manual take-up lever must be kept outside with a key. Optionally, automatic closing can be provided and a safety photocell can be connected. Long-life traction motors do not require lifetime lubrication. Decorative garage door panels can be fitted with semicircular and rectangular sectioned double-walled decorative windows for lighting. The panel types used in ISO 220 models are below. As standard, its outer – inner side is RAL 9002. It can be easily adapted to your structure by painting it in the desired color.