Page 100 - isodoor katalog 2021-- - ing-son.indd
P. 100
Technical Information
• Isodoor had its doors tested in accordance with ISO EN 13241-1 standards in RISE-SP, Europe’s
leading test center, in 2014-2019 and successfully concluded.
• In addition, our company is the only institution in the sector that has the Domestic Goods
Certificate.
• Door panels are 40 mm thick. (0.5 mm galvanized steel + polyurethane + 0.5 mm. Galvanized
steel)
• Integral sealing with the panel that provides sealing between two panels when placed on top of
each other. Gasket is available.
• The inner and outer sheets of our panels are clamped in such a way that they cannot be separated
from each other.
• In the sections where the hinges will be screwed on the panels, the lower and upper sheets come
together and form a total thickness of 2 mm, and has a structure that cannot be separated.
• There is a special polyurethane filler injected at high pressure between the outer surface steel
plates of our door panels, which preserves the ambient temperature.
• The special polyurethane filling of our panels does not contain CFC (Chloroluorocarbon) and
has the feature of protection against mold, insects and bacteria.
• The heat transmission coefficient of the panels is 0.50 W/m² ˚C.
• Polyurethane foam, which is the panel filling material, has a density of 50 kg/m³.
• The thermal conductivity of polyurethane foam is 0.017 Kcall/(m.K) at an average temperature
of 9.97 ˚C.
• Wind resistance is En 12424, Industrial door is class 3 - Garage door is class 5.
• Water tightness value is EN 12425 Industrial door class 3 – Garage door class 3.
• Air permeability value is EN 12426, Industrial door class 2 - Garage door class 3.
• Our panels have finger pinch safety.
• The weight of our panels is 11 kg/m².
• For the connection of hinges and components on the panels, the inner and outer sheet bends
are adjacent to each other at the connection point of the hinge screws in polyurethane filling.
• When the door size is 6 meters or more, reinforcement sheets, double side hinges and long
spindle wheels are used in panel joints to increase resistance against impacts and wind loads
in panel joints.
100 www.isodoor.com.tr